Pantum M5005 - Manual (Page 3)

II
Safety Precautions
Laser Safety
Laser radiation is harmful to the human body. Since the laser components are completely
sealed within the printer, laser radiation will not leak. To avoid laser radiation, please do not
disassemble the printer at discretion!
The device is certified as a Class IIIB laser product. Since radiation emitted inside the device
is completely confined within protective housings and external covers, the laser beam
cannot escape during any phase of normal operation. Do not open the laser unit under any
circumstances to avoid exposure to the laser beam.
The following label is attached to the laser components inside the printer.
Safety Warning
Please note the following safety warnings before using the printer:
There is a high-voltage current inside the printer. Before
cleaning the printer, make sure the power is turned off!
Warning
Plugging and unplugging the power cord plug with
a wet hand may result in an electric shock.
The fuser unit bears a high temperature warning
label. Please do not remove or damage this label.
The fuser unit is hot during and after
printing. Touching the fuser unit (the
shaded area as shown) may cause burns!