Language settings, Copies, Power saving button – Pantum M5005 User Manual
Page 47: Language settings -3, Copies -3, Power saving button -3, System setting 2.language
4-3
5) Press Menu button to exit the menu interface directly or select the last option from each
level of menu and press OK button to exit the menu interface.
Status
Start
Cancel
Scan
Copy
OK
4.1.2. Language Settings
Language setting is used to select the language of the control panel to be displayed.
1) Press the Menu button to enter the menu interface.
2) Press direction pad ▲ or ▼ to select 3. System setting and press the OK button.
3) Press direction pad ▲ or ▼ to select 2. Language and press the OK button.
System setting
2.Language
OK
4.1.3. Copies
When more than one copy (1-99 copies) is required, press Copies button to flash to Copies
mode and the copies value starts flashing. Then press direction pad ▲ or ▼ to adjust copies;
short press of the button ▲ or ▼ represents 1 copy is added or subtracted and long press of
the button ▲ or ▼ represents 10 copies are added or subtracted.
100
01
%
T P
A4
+
OK
Press the OK button to finish the settings.
4.1.4. Power Saving Button
ID copy
Receipt copy