Pantum M5005 User Manual
Page 22
2-7
d) Put a piece of paper, envelope or transparency into the manual feeder tray with two hands
until the front end of the paper, envelope or transparency contacts the feed roller.
Note:
• When loading paper into the manual feeder tray, the printer will automatically
enable the manual feed mode.
• Load the paper into the manual feeder tray print-side up. When loading, the top
of the paper first enters into the manual feeder tray.
• Ensure that the paper, envelope or transparency is loaded in straight and in the
correct position of the manual feeder tray. Otherwise, it will result in a skewed
printout or a paper jam.
After printing, please immediately remove the paper, envelopes and
transparencies. Stacking paper or envelopes may cause a paper jam or cause
the paper to curl.
Warning
e) After the printed page is output from the printer, load another piece of paper according to
the above steps to continue printing.