Pantum M5005 - Manual (Page 69)

7-4
7.2.2. ID Copy
ID copy Receipt copy
Press this button to enter ID Copy mode. It is used to copy ID cards and other two-sided
certificates.
Procedures for ID Card copies:
1. Press this button to flash to ID Copy mode. The area on the main interface that displays
image quality will then change to display ID Card;
2. Place the certificates on the left half of the scanning platform and press the Start button to
start the scan. The LCD will then prompt Copying...;
3. After scanning the first side is completed, the LCD will display Flip ID Card: Start in the first line
and Finish Scan OK in the second line;
4. If the scanning of the second side of the ID Card is required, please open the cover to
flip ID Card and keep it in the same area. After pressing down Start button, LCD will prompt
Copying...; After completing scan, the front and back of the ID Card will be copied to the same
page of the same paper;
5. If only one side is required, then press the OK button to end scanning. This time only one
side of the ID Card is copied to one side of the paper.