Brother MFC 9840CDW User Manual

Page 40

Printing

• Normal

600 dpi class. Recommended for ordinary printing. Good print quality with good print speeds.

• Fine

2400 dpi class. The finest print mode. Use this mode to print precise images such as photographs.
Since the print data is much larger than in normal mode, processing time, data transfer time and
printing time will be longer.

Toner Save Mode

You can conserve toner using this feature. When you set Toner Save Mode to On, print appears
lighter. The default setting is Off.

Note

We do not recommend Toner Save Mode to On for printing Photo or greyscale images.

Colour/Mono

You can change the Color/Mono settings as follows:

• Colour

When your document contains color and you want to print it in color, select this mode.

• Mono

Select this mode if your document has only black and greyscale text and/or objects. Mono mode
makes the print processing speed faster than color mode. If your document contains color,
selecting Mono mode prints your document in 256 levels of grey .

• Auto

The printer checks the content of your documents for color. If color is detected, it prints in color. If
no color content is detected, it prints in monochrome. This operation may reduce the total printing
speed.

Note

If the Cyan, Magenta or Yellow toner runs out, choosing Mono will allow you to keep printing as long as
the Black toner does not run out.

Gamma Correction

You can adjust the brightness of documents compared to the image on the screen.

Colour Mode

The following options are available in Color Mode:

• Normal

This is the default color mode.

• Vivid

The color of all elements are adjusted to become a more vivid color.

Improve Grey Colour

You can improve the image of shaded area.