Brother MFC 9840CDW - Manual (Page 138)

Printing and Faxing
131
8
d
Press 1 to select Yes.
You can reset the calibration parameters back to those set at the factory.
a
For MFC-9440CN and MFC-9450CDN, press Menu, 4, 5.
For MFC-9840CDW, press Menu, 4, 6.
For DCP-9040CN and DCP-9042CDN, press Menu, 3, 5.
b
Press a or b to Reset.
c
Press OK.
d
Press 1 to select Yes.
Note
If an error message is displayed, press Stop/Exit and try again. For more information, see
Troubleshooting and routine maintenance in the User’s Guide.
Auto Registration
8
Registration
8
If solid areas of color or images have cyan, magenta or yellow fringes, you can use the auto-registration
feature to correct the problem.
a
For MFC-9440CN and MFC-9450CDN, press Menu, 4, 6, 1.
For MFC-9840CDW, press Menu, 4, 7, 1.
For DCP-9040CN and DCP-9042CDN, press Menu, 3, 6, 1.
b
To start, press 1.
To exit, press 2.
c
Press Stop/Exit.
Frequency
8
You can set the interval time you want to carry out the auto registration.
a
For MFC-9440CN and MFC-9450CDN, press Menu, 4, 6, 2.
For MFC-9840CDW, press Menu, 4, 7, 2.
For DCP-9040CN and DCP-9042CDN, press Menu, 3, 6, 2.
b
Press a or b to choose Low, Medium, High or Off.
Press OK.
c
Press Stop/Exit.