Kessler MOTION CONTROL: Oracle Controller Full (3.02 SL) - Manual (Page 35)

Note:
In Slider/TT mode:
Axis 1 refers to Slider
Axis 2 refers to 2nd Device
In Head Unit mode:
Axis 1 refers to Tilt
Axis 2 refers to Pan
CONFIGURING JOYSTICK
The ORACLE joystick can be adjusted to suit your preference or
particular setup.
If you find that the joystick moves your Slider/Dolly/Head in the
opposite direction of what you would like, you can reverse the
direction the joystick moves the motor(s).
The joystick can be set to move in clockwise ( CW ) or counter
clockwise ( CCW ) on both the X and Y axis independently.
1. From the home screen, press the MENU button
2. Move the Joystick downward until Joystick is selected
Press the MIDDLE JOYSTICK BUTTON or ENTER to confirm.
4. Move the Joystick LEFT/RIGHT/UP/DOWN so that the arrow is
on the value you want to make changes to.
5. While selected, toggle Axis1 or Axis2 from CCW to CW
by pressing the MIDDLE JOYSTICK BUTTON or ENTER.
6. While selected, toggle UP/DN, L/R, TWIST by pressing
the MIDDLE JOYSTICK BUTTON or ENTER.
7. When finished, press the MENU button.
510
- 0
1.25S
- 0
LIN
99
Joystick < ^
Utility
Axis1 CCW < UP/DN
Axis2 CW L/R
35