Motion control - advanced, Head unit – Kessler MOTION CONTROL: Oracle Controller Full (3.02 SL) User Manual

Page 25

HEAD UNIT

MOTION CONTROL -

ADVANCED

CONTINUED

Select the desired

PAN Motor OFF

time

Note: Only for Continuous & No Intervlmtr

Again, the default is 0.05 s (seconds). This is the amount of time the

motor remains off before running again. Leave this at the default for

now by pressing the MIDDLE JOYSTICK BUTTON or ENTER.

Select the desired

PAN Motor Power

The default power is 40 and is a good starting point for time lapse work.

The power setting tells the ORACLE how much power to send to the

motor when it is on.

Press the MIDDLE JOYSTICK BUTTON or ENTER to continue.

Note:

The PAN Power setting can be either a positive number or negative

number. This will determine whether the Head Pans left or right. Two

determine whether you need a negative or positive number, make

note of the X/Y values on the home screen. If you move left and the

X values are negative, you’ll know that you need a negative value set

for Pan Power to move left and a positive Pan Power to move right.

10.

Select the desired

Run Time/Pictures/Axis 1 Cycle

Note: Only will show Pictures in Stop Motion

Note:

The number of Pictures is also the Axis 1 Cycle

Cycles are the number of times your motor will cycle on/off for the

move. To increase or decrease the amount of time you want the

move to last, toggle the JOYSTICK UP/DOWN to adjust the number of

cycles. The time value will change to tell you how long the move will

take. Once you have your cycle settings adjusted, press the MIDDLE

JOYSTICK BUTTON or ENTER to continue.

11.

Select the desired

TILT 2 Motor On

Note: Only will show in Continuous and No Intervlmtr

12.

Select the desired

TILT 2 Motor OFF

Note: Only will show in Continuous and No Intervlmtr

13.

Select the desired

TILT 2 Power

13.

Select the desired

TILT 2 Cycles

Note: Only will show in Continuous and No Intervlmtr

The above for menus are have the same meaning

as the similar

SLIDER

menus.

TILT Motor ON

0.05 S

TILT Motor OFF

0.05 S

TILT Power

TILT Cycles

1005

24M 17S

Pan Power

PAN Motor OFF

0.05 S

Run Time

24M 14S

Pictures

1003