Kessler MOTION CONTROL: Oracle Controller Full (3.02 SL) - Manual (Page 14)

REVOLUTION HEAD RECORD & PLAYBACK
MOTION CONTROL - LIVE RECORDING
This section will cover recording and playing back real-time
camera moves on a Kessler Crane Revolution pan/tilt head.
1. Once in Head mode press the MENU button until you
get to the main menu
2. Use the joystick to move the camera carriage to your desired
start position. Note this position. For convenience you can use
a piece of tape, wax pencil, or optional measuring strip.
3. Move the Joystick down and select Motion Control
Press the MIDDLE JOYSTICK BUTTON or ENTER to confirm
4. Move the Joystick down and select Live Record .
Press the MIDDLE JOYSTICK BUTTON or ENTER to confirm
5. Press any 1, 2, 3 Button to select a memory location
6. Move the joystick to begin recording your camera
movement. Press the MIDDLE JOYSTICK BUTTON to begin
recording with a pause before the beginning your movement.
7. MAX SPEED, DAMPING and DEADBAND can all be adjusted
during this time and will be recorded as will the timing
8. All movement is recorded in real time and a seconds counter is
displayed on the screen
Quick Tip - “Cruise Control”:
To lock the values of the ORACLE while recording, press the ENTER or
MIDDLE JOYSTICK BUTTON while holding the joystick in one position.
To unlock press the ENTER or MIDDLE JOYSTICK BUTTON again.
9. Press the same memory bank BUTTON (1, 2, OR 3) again or
press the MIDDLE JOYSTICK BUTTON stop the recording
10. To play back your recorded movement, press the BUTTON
(1, 2, OR 3) for the memory bank you recorded it on
11. The screen will prompt you to return the Revolution head to
the start position marked in the Note on the previous page
12. Use the joystick to move the head back to your start position
13. Press your memory bank BUTTON (1, 2, OR 3) again to
start playback. The screen will display Play Back with the
amount of time remaining.
Recording
1 11
Memory Bank Seconds Counter
Please Return to
Start Position
14
Camera
Motion Control < v
Live Record.
Press 1, 2 or 3
SmartLapse
Live Record < v