IDX BMS - Manual (Page 65)

User Guide for Battery Management System Ver4.2
Page 65/75 IDX Company, Ltd.
ｆ. Number of Over Discharges: Specify this condition when searching for batteries that have
been over-discharged “xx times or more” or “less than xx
times. ”
ｇ. Number of High Load: Specify this condition when searching for batteries that have
been used with high loads “xx times or more” or “less than xx
times. ”
ｈ. Length of Storage/Inactivity: Specify this condition when searching for batteries that have
neither been charged nor discharged “xx days or more” from
the last use.
ｉ. Search for Specific Ser. No.: Specify this condition when searching for batteries by serial
number. (This condition cannot be used with other search
conditions.)
ｊ. Search for specific Battery User ID: Specify this condition when searching for batteries by user
battery ID. (This condition cannot be used with other search
conditions.)
ｋ. Search for Specific Battery Model: Specify this condition when searching for batteries by battery
model.
ｌ. Search: Click this button to start search after search conditions a to k
have been selected.
ｍ. Qualifying Batteries: After the Search button is clicked, the number of batteries
that match the selected conditions and the total number of
batteries recorded in the database will be displayed.
ｎ.Results of Individual Searches: A list showing the number of batteries that matched each
search condition is displayed. You can click to select a desired
data field (the selected data field will change its color) and
check the usage record and latest diagnostic data of the
selected battery.
ｏ. Ser. No.: The serial number of the battery selected from the search
results is displayed.
ｐ. Preview: Clicking this button will open a screen showing the latest
diagnostic data of the selected battery.
ｑ. Archive: Clicking this button will open a screen showing the usage
record of the selected battery
ｒ. Print Search Result: Clicking this button will print the search result table.
ｓ. Narrow Search: Display the warning value setting screen
ｔ. Close: Clicking this button will close the DataBase screen
and the program will return to the Diagnostic screen.