IDX BMS User Manual
Page 61
User Guide for Battery Management System Ver4.2
Page 61/75
IDX Company, Ltd.
Load Value(Watts) Setup
You can set discharge loads (unit: W) for the hardware.
Refer to CHAPTER 14,
“Setting Up BMS-VR” for details
on the setting procedure.
Termination Voltage Setup
You can set termination voltages (unit: V) for the
ESC-4i/VAL-4Si/BMS-VR. Refer to CHAPTER 14,
“Setting Up BMS-VR” for details on the setting procedure.
DataConversion (IPF Filt to DataBase)
Saved data in files are converted and read into database.
PC1
Diagnostic data
Ipf File
Database File
SAVE IPF File
Saved in both files
PC2
Ipf File
Simply saving an file that has been received as an
e-mail attachment will not save the file to the
database.
attachment,
etc.
PC2
Ipf File
Database File
Data Convert
By executing the Data Convert procedure, the
data will be saved as a database file accessible
on PC2.
Save DB