IDX A-MWRS - Manual

Wireless Receiver Mounting Bracket
A-MWRS
●
●
●
●
●
●
●
＊ V-Plate selections are optional.
●
●
●
V-Plate Series (Option)
・P-V2 / P-VS2 : 14V (unregulated)
・P-V257 : 5V / 7.3VDQG14V (unregulated)
・P-V284 : 8.4V and 14V (unregulated)
・P-V212 : 12V and 14V (unregulated)
䠆
〈 D-TAP out put 〉
Thank you for purchasing the A-MWRS. This bracket is an optional adaptor designed to fit a
wireless receiver, back-up recorder and other accessories onto a camcorder together with
V-Mount batteries. Prior to using the A-MWRS, IDX recommends reading this Instruction
Manual on how to best use this bracket. Please keep this manual for your reference.
A-MWRS can be attached directly to the V-Mount on most camcorders, the CW-5HD
and AC-100 without using screws.
An optinal IDX V-Plate can be attached.
Plate depth can be adjusted to four different position; all ENDURA batteries, including
PowerLink configuration, will fit into it.
Wireless audio receivers and other equipment can be attached to either side of the
bracket simultaneously.
Rear panel can be removed if it is not used.
Features
Specifications
Assembly
Weight : approx. 340g / 0.75lbs.
Dimensions : 115(W) ™153(H)™102-153(D)mm / 4.53(W)™6.02(H)™4.02-6.02(D) inches.
Selecting the correct P-V Plate for your application.
Please connect each connectors’ cable as
shown at left
Make sure that all the cables and connectors
fit in the space; the cables should not
pinch inside the plate enclsure after the
screws have been tightened.
Rear panel
M4 screw
The depth of A-MWRS can be set in four different
positions to suit your battery set up. To adjust the
depth, loosen the screws on either side and adjust
to desired placement; then tighten the screws again.
Rear panel can be removed if it is not needed.
wire clip & M3 tapping screw Set the mounting bracket by using the 4 ™screws
to the A-MWRS as described in drawing
Accessories can be fitted to either
side of the bracket.
Do not attempt to modify this unit. All work
should be carried out by IDX authorized
sarvice personnel only.
When connecting a battery or adapter to the
A-MWRS, be sure connect firmly. If it is not
attached properly, it may result in loss or
damage to the unit or even injury to the user.
If you to need any inspection or repairs,
please contact your IDX dealer or
appropriate IDX office.
General Notes and Safety
2010 09
Assembling & Adjustment of Rear Panel
Can be attached to
the V-Mount on CW-5HD and AC-100.
Supports PowerLink configulation.
Application Example
M3 bracket
M4 bracket
Set up To set up the A-MWRS, please review the following.
IDX System Technology, Inc. : 19001 Harborgate Way, Suite 105, Torrance, CA 90501 USA
Tel : +1-310-328-2850 Fax : +1-310-328-8202 E-mail : [email protected]
IDX Technology Europe, Ltd. : Unit 9, Langley Park, Waterside Drive, Langley, Berkshire SL3 6EZ England
Tel : +44-1753-547-692 Fax : +44-1753-546-660 E-mail : [email protected]
IDX Company, Ltd. : 6-28-11 Shukugawara, Tama-ku, Kawasaki-shi, Kanagawa-ken 214-0021 Japan
Tel : +81-44-850-8801 Fax : +81-44-850-8838 E-mail : [email protected]