IDX BMS - Manual (Page 48)

User Guide for Battery Management System Ver4.2
Page 48/75 IDX Company, Ltd.
 ADJ
This checkbox is used to enter a battery user ID and specify discharge settings. Selecting this checkbox
will make the corresponding USER ID and Term Volt/Discharge Load fields editable. Selecting the
checkbox again will display the confirmation screen and by selecting “ yes” will apply the entered settings
to the hardware.
 Battery User ID
Optional character string that can be stored in the battery. The USER ID provides a simple means for
identifying each battery. You can set a character string consisting of up to five single-byte alphanumeric.
 Charge Voltage
This data is displayed only when the battery is charging. The current charge voltage is indicated.
 Charge Current
This data is displayed only when the battery is charging. The current charge current is indicated.
 Discharge Term Volt
The termination voltage is indicated. You can enter a desired value with the Change checkbox selected.
This will become the voltage at which discharge will be terminated (setting range: 10.0 to 13.5 V).
 Discharge Load
The power output is indicated. You can enter a desired value with the Change checkbox selected. This will
become the power output during discharge (setting range: 13 to 40 W)
You can also access the following function buttons.
 Last Data of Discharge (F1)
This button becomes selectable when a channel connected to a battery is selected. Clicking this button will
open the Diagnostic screen of the selected battery. For the Diagnostic screen, refer to CHAPTER 11.
 Data Archive (F2)
This button becomes selectable when a channel connected to a supported battery is selected. Clicking this
button will open the Data Archive screen of the selected battery. For the Data Archive screen, refer to
CHAPTER 12 Data Update.
 Data Update (F3)
Clicking this button will refresh the list and obtain the latest status data from the hardware.
 Battery Setup (F4)
This option is highlighted when a supported battery is connected to the channel. A user selected
name or ID can be stored in the battery. The Battery User ID provides a simple means for
identifying each battery.
When this button clicked, The following dialogs are displayed