IDX BMS - Manual (Page 41)

User Guide for Battery Management System Ver4.2
Page 41/75 IDX Company, Ltd.
 Status
Status of battery by each charger channel. The following statuses may be indicated.
---- No battery is connected
CHARGING Charging
M CHARGING Charging in the BMS recording mode
DISCHARGING Discharging
M DISCHARGING Discharging in the BMS recording mode
WAITING Waiting for charge/discharge to start
M WAITING Waiting for BMS recording mode
COMPLETE Charging has been completed
ERROR Error is present
Double-clicking a gray STATUS field will start BMS recording (if the BMS recording mode is currently active,
the mode will be cancelled).
 Battery Model
Model of the battery. “--------“ will be shown for unsupported batteries.
 Battery Serial
Serial number of the battery. “--------” will be shown for unsupported batteries.
 Battery User ID
Optional character string that can be stored in the battery. The USER ID provides a simple means for
identifying each battery. You can set a ID consisting of up to five single digit alphanumeric characters.
 Number of Cycles
Cycle count recorded in the battery
 Remaining Capacity
Current ( remaining )capacity recorded in the battery
 Date of First Full Charge
First time full charge date recorded in the battery
 Number of Over Discharges
Number of Over Discharges recorded in the battery.
 Number of High Loads
Number of High Loads recorded in the battery
 Time to Full Charge
Estimated remaining time to the full charge status (only when battery is being charged.)
By double clicking the header part on the list, each item can be sorted and displayed.