E-flite Taylorcraft 450 ARF - Manual (Page 35)

35 E-flite Taylorcraft ARF Assembly Manual
 4. Use canopy glue to secure the seats inside the
fuselage. Allow the fuselage to rest on its wheels until the
glue fully cures.
 5. Test fit the struts between the fuselage and wing.
The strut end will slide under the landing gear covers
as shown. They can be turned over (top to bottom) if they
do not align with the holes in the wing and fuselage.
Secure the strut to the fuselage using a 2mm x 8mm
sheet metal screw.