E-flite Taylorcraft 450 ARF - Manual (Page 27)

27 E-flite Taylorcraft ARF Assembly Manual
 5. Repeat Steps 3 and 4 to install the remaining wheel.
  6. Rest your model on a flat surface. Slide the wheel
pant over the wheel and position it so there is ground
clearance for the wheel pant.
  7. Use a felt-tipped pen to mark the location for the
wheel pant screw.
  8. Drill the location marked in the previous step using a
pin drill and 1/16-inch (1.5mm) drill bit.
  9. Position the wheel pant back on the gear and secure it
using a 2mm x 6mm sheet metal screw.
 5. Repeat Steps 6 through 9 to install the remaining
wheel pant.