E-flite Taylorcraft 450 ARF - Manual (Page 30)

30 E-flite Taylorcraft ARF Assembly Manual
 6. Cut and tape a piece of card stock on both sides of
the fuselage to indicate the front edge of the fuselage.
 7. Slide the cowling onto the fuselage.
 8. Attach the propeller to the adapter and slide the
assembly onto the motor shaft.
Important Information About Your Propeller
It is very important to check to be sure the propeller is
balanced before installing onto the shaft. An unbalanced
propeller may strip the gears or cause poor flight
characteristics.
Note: If it is necessary to enlarge the hole in the
propeller, make sure to check the balance of the
propeller afterwards.