E-flite Taylorcraft 450 ARF - Manual (Page 34)

34 E-flite Taylorcraft ARF Assembly Manual
Window and Strut Installation
Required Parts
Fuselage Wing
Wing strut (2) 2mm x 8mm sheet metal screw (6)
Side window (R&L) Windshield
Molded seats (2)
Required Tools and Adhesives
Canopy glue #1 Phillips screwdriver
Hobby scissors Low-tack masking tape
 1. Use hobby scissors to trim the side windows. Lines
have been molded into the windows to use as a guide for
trimming the windows.
 2. Use canopy glue to glue the window in from the inside
of the fuselage. Use low-tack masking tape to hold the
windows in position until the glue fully cures.
 3. Use canopy glue to glue the windshield to the
fuselage. Use low-tack masking tape to hold the
windshield in position until the glue fully cures.