E-flite Taylorcraft 450 ARF - Manual (Page 29)

29 E-flite Taylorcraft ARF Assembly Manual
 3. Plug the motor wires into the speed control. Secure the
speed control to the bottom of the motor box using hook
and loop tape.
 4. This photo shows the installation of the 480 motor.
Simply follow Steps 1 through 3, only using the 480
motor instead of the 450 motor.
 5. Turn on the radio system and plug the battery into the
speed control. Use the throttle to check that the motor
rotates counterclockwise when viewed from the front. If
not, follow the directions included with your speed control
to change the direction of the motor rotation.
Note: Never check the motor rotation on the bench
with the propeller installed. The plane could move and
cause serious injury. Always check the motor without the
propeller to avoid injury.