E-flite Brio 10 ARF User Manual

Page 40

Note: Two spacers have been provided that

are placed between the propeller and spinner

backplate. Use the thin spacer for low-pitch

propellers, the thick spacer for high-pitch

propellers. This will prevent the blades of the

propeller from contacting the spinner backplate.



5. Slide the spinner backplate onto the gearbox

shaft. Slide the propeller ontot he shaft then
secure the propeller and spinner backplate
using the supplied aluminum prop adapter cone.

Note: It is very important that you check to be

sure the propeller is balanced before installing

onto the shaft. An unbalanced propeller will

cause performance issues. Some propellers will

need the center hole drilled out to fit the shaft

size of your outrunner. It is very important the

hole is drilled concentric or it can cause the

propeller to be unbalanced.



6. Snap the spinner cone onto the

spinner backplate.