E-flite Brio 10 ARF - Manual (Page 38)

 1. Connect the ESC to the motor and secure the
ESC to the inside of the fuselage using hook and
loop material and/or a tie wrap. The location
of the ESC may be changed depending on
the length of the motor wires, type of ESC and
necessity to move the ESC to achieve the correct
Center of Gravity.
 2. Use the radio system and motor battery to
determine the direction of rotation of the
propeller. When connected correctly it should
rotate counter-clockwise when viewed from the
front of the aircraft. If not, follow the directions
included with the speed control to correct the
direction of rotation.
 3. Attach the cowling using four 3mm x 8mm sheet
metal screws.
38