E-flite Brio 10 ARF - Manual (Page 32)

Power 10 Outrunner Motor Installation
Required Parts
• Fuselage
• Outrunner offset mounts, 32mm (4)
• 4-40 x 43mm socket head screws (4)
• 4-40 washers (4)
• Power 10 Brushless Outrunner Motor
Required Tools and Adhesives
• Hex wrench: 3/32"
Skip to page 36 for setup of a 6-pole motor
installation using a gearbox.
Note: This section covers the installation of our
Power 10 Outrunner or equivalent size motor.
 1. Attached the aluminum X-mount to the back of
your motor with the flat head machine screws
included with your motor.
32