E-flite Brio 10 ARF - Manual (Page 34)

6-Pole Motor Installation
Required Parts
• Fuselage
• 2mm x 8mm sheet metal screw (3) (to secure mounts)
• 4-40 x 1/2" (12mm) socket head screw (4)
• Firewall stick mount
• 6-Pole motor
• 400 Gearbox w/56T 0.5M spur gear
• 19T 0.5 Module 3.2mm ID pinion gear
Required Tools and Adhesives
• Hex wrench: 3/32"
• Phillips screwdriver (small)
• Medium CA
• Threadlock
Note: This section covers the installation of an
inrunner motor and gearbox. Refer back to
pages 31 or 34 for outrunner installation.
 1. It may be necessary to attach pinion gears or
other accessories to your particular motor at this
time. Follow instructions included with your motor.
Note: It is very important that the gear mesh
is set correctly and is smooth with no binding.
The E-flite ™ gearbox features adjustable slotted
mounting holes to ensure your gear mesh is
correct. Remember, if the gear mesh is too loose
or too tight it may strip the gears. To extend
the life of your gearbox, we also recommend
using a small amount of grease, such as lithium
grease, on the spur gear.
34