E-flite Brio 10 ARF - Manual (Page 31)

 2. Attach the outrunner motor to the outrunner
motor mount using the included spacers (4) and
3mm x 8mm screws (4).
 3. First, cut 3/16" inches (5mm) off the end of
the included Firewall Stick Mount so the motor
properly clears the cowling. Assemble the
Outrunner stick mount to the Park 480 Outrunner
using the spacers and screws provided with the
mount. Attach to the Brio firewall using the four
4-40 x 1/2" socket head bolts. Attach the motor
to the Firewall Stick Mount as shown.
Note: You might want to add a drop or two of
medium CA to take up any slop in the mount.
31