E-flite Brio 10 ARF - Manual (Page 15)

Aileron Hinging
Required Parts
• Wing (left and right)
• Aileron (left and right)
• CA hinges (6)
Required Tools and Adhesives
• T-pins • Thin CA
• Drill • Paper towel
• Drill bit: 1/16" (2mm)
  1. Locate the positions for the hinges. Drill a
1/16" (2mm) hole in the center of each slot of
both the wing and aileron. This creates a tunnel
for the CA, allowing the CA to penetrate into the
hinge better, bonding the hinges more securely.
15