beautypg.com

Grill location, Cylinder requirements, Propane gas grills – Broilmaster P3XN-1 User Manual

Page 16

background image

B101525-4-0411

Page 16

Grill Location

When choosing the ideal location for your Broilmaster

®

Pre-

mium Gas Grill, remember this grill is designed for outdoor

use ONLY.

You should never install or operate your grill in any building,

garage, or other enclosed area.

For your safety, this grill should not be installed or operated

under any combustible materials, such as carports, covered

porches, awnings, or overhangs.

Never install or operate your grill in or on any recreational

vehicle or boat.

CAUTION: The installation and operation of this grill at

clearances less than specified below may lead to the

possibility of fire, property damage, or personal injury.

A minimum clearance of sixteen inches (16") is required from

the sides of the grill to any combustible material.

A minimum clearance of eighteen inches (18") is required

from the back of the grill to any combustible material.

Some examples of combustible materials are a wall, a fence,

patio furniture, or the wall of your home.

The area surrounding the grill should be clear to ensure

proper ventilation. Do not obstruct the flow of combustion

and ventilation air in any way. The ventilation openings on

the propane cylinder enclosure must also remain free and

clear of debris.

Portable grills should be level and positioned away from direct

wind prior to each use.

WARNING: Do not install or operate this grill where

gasoline or other flammable materials are used or stored.

Failure to comply with this warning could result in explo-

sion or fire causing property damage or personal inju-

ry.

Cylinder Requirements

Your Broilmaster

®

Premium Gas Grill requires a standard

twenty (20) pound propane gas cylinder.

The maximum height allowable for a replacement cylinder is

approximately twelve (12") inches (30.5 centimeters)

.

The propane gas cylinder used must be:

1. Constructed and marked in accordance with the specifica-

tions for LP gas cylinder of the U.S. Department of Trans-

portation (D.O.T.) or the National Standard of Canada,

CAN/CSA-B339, Cylinders, Spheres, and Tubes for

Transportation of Dangerous Goods; and Commission

as applicable.

2. Provided with a listed overfilling protection device

(OPD).

3. Provided with a listed safety device having direct access

with the vapor space of the cylinder and the cylinder

supply system must be arranged for vapor removal.

4. Provided with a shutoff valve terminating in a valve outlet

as specified in the Standard for Compressed Gas Cylin-

der Outlet and Inlet Connections, ANSICGA-V-1.

5. Provided with a plug to effectively seal off the cylinder

outlet when the cylinder is being stored or transported.

6. Provided with a collar to protect the cylinder valve.

Caution: Do not use a propane gas cylinder which has

a capacity greater than twenty (20) pounds with this grill

and side burner.

PROPANE GAS GRILLS

This manual is related to the following products: