Banner SureCross DX80 Wireless Networks - Manual (Page 5)

Terminal Block (IP67 Housing)
PWR
AXN
GND
CI2
CI1
DO2
DO1
PWR
AXP
GND
TIN
TIP
DI2
DI1
GND GND
AXN, AXP. Not used. Do not make any wiring connections to these terminals.
CIx. Counter IN x.
DIx. Discrete IN x.
DOx. Discrete OUT x.
GND. Ground/dc common connection.
PWR. Power, 10 to 30V dc power connection.
TIN, TIP. Not used. Do not make any wiring connections to these terminals.
Ignore alternate labeling referring to other models that use this board.
Terminal Block (IP20 Housing)
For the DX8x...C models, PWR in the wiring diagram refers to V+ on the wiring board and GND in the wiring diagram refers to V- on the
wiring board. Ignore alternate labeling referring to other models that use this board.
FlexPower Discrete Models FlexPower Serial Interface Models FlexPower Counter Models
B+. 3.6 to 5.5V dc (for battery powered
models only).
DIx. Discrete IN x.
DOx. Discrete OUT x.
RX/-. Serial comms line
SPx. Switch Power. Provides variable
power sources for external devices.
TX/+. Serial comms line
V+. Power, 10 to 30V dc power connec-
tion.
V-. Ground/dc common connection.
B+. 3.6 to 5.5V dc (for battery powered models
only).
CMx. Serial interface connection. For non-seri-
al interface models, do not make any wiring
connections to these terminals.
DIx. Discrete IN x.
DOx. Discrete OUT x.
RX/-. Serial comms line
SPx. Switch Power. Provides variable power
sources for external devices.
TX/+. Serial comms line
V+. Power, 10 to 30V dc power connection.
V-. Ground/dc common connection. B+. 3.6 to 5.5V dc (for battery powered
models only).
CIx. Counter IN x.
DIx. Discrete IN x.
DOx. Discrete OUT x.
RX/-. Serial comms line
SPx. Switch Power. Provides variable
power sources for external devices.
TX/+. Serial comms line
V+. Power, 10 to 30V dc power connec-
tion.
V-. Ground/dc common connection.
Wiring Diagrams for Discrete Inputs
Connecting dc power to the communication pins will cause permanent damage. For the DX8x...C models, PWR in the wiring diagram
refers to V+ on the wiring board and GND in the wiring diagram refers to V- on the wiring board.
Discrete Input Wiring for PNP Sensors Discrete Input Wiring for NPN Sensors
DIx
PWR 10-30V dc
DIx
GND
dc common
Wiring Diagrams for Discrete Outputs
Connecting dc power to the communication pins will cause permanent damage. For the DX8x...C models, PWR in the wiring diagram
refers to V+ on the wiring board and GND in the wiring diagram refers to V- on the wiring board.
SureCross DX80 FlexPower Counter Node
P/N 136348 Rev. G www.bannerengineering.com - tel: 763-544-3164 5