Metrohm IC Net 2.1 - Manual (Page 83)

6.6 733 IC Separation Center
IC Net 2.1 75
6.6 733 IC Separation Center
6.6.1 733 IC Separation Center features
The Metrohm 733 IC Separation Center is a thermally and elec-
tronically isolated wet part which accommodates injectors, col-
umns, detectors, suppressor module and pulsation dampener
and is controlled by and connected to the 732 IC Detector. The
following versions are available:
x 2.733.0010 IC Separation Center with 1 injector
x 2.733.0020 IC Separation Center with 2 injectors
x 2.733.0120 IC Separation Center with 2 injectors, metal-free
x 2.733.0030 IC Separation Center with 1 injector and 1 sup-
pressor module
x 2.733.0130 IC Separation Center with 1 injector and 1 sup-
pressor module, metal-free
The 733 IC Separation Center, which is normally operated by the
732 IC Detector, can be fully operated using the «IC Net» pro-
gram. The 733 IC Separation Center with one injection valve is
normally connected to the 732 IC Detector using the 6.2125.090
cable. For the operation of a 733 IC Separation Center with two
independent columns and two injection valves, two individual
732 IC Detectors are needed. Each of this detectors is connected
to the 733 IC Separation Center using a 6.2125.090 cable. For
operation of a two-valve system with «IC Net», two
732 icons and
two 733 icons (one for valve A and one for valve B) have to be in-
stalled in the SYSTEM window.
For detailed information about the 733 IC Separation Center see
732/733 Instructions for Use. Examples for interconnections
with the 733 IC Separation Center, the 732 IC Detector and the
762 IC Interface can be found in the 762 Instructions for Use.
6.6.2 733 IC Separation Center icon
The 733 icon is available in the SYSTEM window if a 733 IC Separa-
tion Center has been installed with the New system wizard or by us-
ing the Setup/New devices/Install new device option of the SYSTEM
window (see section 6.1.2).