Metrohm IC Net 2.1 - Manual (Page 182)

7 Methods
IC Net 2.1 174
type The types of components are designated
by a one-letter code:
R Reference component (used for peak
identification).
S Standard component.
C Calibration standard in the case it is differ-
ent from the quantification standard.
?
Some points of corresponding peak are out
of ADC or detector range – suspicious re-
sult.
! Component concentration is outside of
minimum (
min C
) and maximum limits
( max C ), set in the component table.
p Special component (it has one of the spe-
cial flags checked on in the component
window).
N The component response is outside of cali-
brated region.
In the case of peaks additional letters pre-
cede the component type information, indi-
cating, how peaks are separated from other
peaks, for example:
BD_ Peak that starts on the baseline ( B ) and
ends on the drop line ( D ) that separates it
from another adjacent peak.
BBR Special case of a rider ( R ) peak that is tan-
gentially separated from the main one. A
main peak will have a third letter
H (horse)
in this case.
The complete component type may look
like:
BBD : !R .
group Number of the group for the component.
spectral ratio
Ratio of responses on different channels for
multi-channel chromatograms.
name Name of the component.
file name File name of chromatogram. This column is
very useful for the purpose of processing of
exported data.
ident Title (identifier) of the chromatogram. This
column is useful for the processing of ex-
ported data.