Metrohm IC Net 2.1 - Manual (Page 73)

6.4 761 Compact IC
IC Net 2.1 65
Outputs
The Outputs tab of the hardware settings window defines remote
output signals to be set automatically if specific events occur.
Event Events for automatic remote signal output:
Inject Switching of the injection valve to the "IN-
JECT" position.
Fill Switching of the injection valve to the "FILL"
position.
Suppressor step Switching of the suppressor module to the
next position.
Pump stop (P max/min)
Pump stopped because pressure limits are
exceeded.
Hardware error Hardware error detected at the 761 Com-
pact IC (high-pressure pump, injection
valve, or suppressor not working correctly).
Alarm leak detector Leak detector has detected solvent in the
instruments interior.
Remote line Set remote output lines 1}8.
Selection: 0 (line off, inactive, open)
1 (line on, active, 0 V)
p (pulse output)
* (leave line in current status)
PowerOn values Display of the power on startup values for
remote output lines set on the
Hardware tab.
Pulse length Length of a pulse in ms.