Metrohm 881 Compact IC pro – Anion - Manual (Page 37)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
881 Compact IC pro – Anion
￭￭￭￭￭￭￭￭ 27
4 Install tubing weighting and aspiration filter
1 2 3 4 5
Figure 10 Install tubing weighting and aspiration filter
1 Eluent aspiration tubing 6.1834.080 2 Eluent bottle attachment 6.1602.160
3 Tubing weighting
From accessories set 6.2744.210. 4 Clamping screw
From accessories set 6.2744.210.
5 Aspiration filter 6.2821.090
With filter holder from accessories set
6.2744.210.
￭ Slide the tubing weighting (10-3) onto the eluent aspiration tub-
ing (10-1).
￭ Slide the clamping screw (10-4) onto the eluent aspiration tubing
(10-1).
￭ Insert the eluent aspiration tubing (10-1) into the aspiration filter
(10-5). The end of the tubing should approximately reach to the
center of the aspiration filter.
￭ Screw together clamping screw (10-4) and filter holder (9-1).
Figure 11 Eluent aspiration tubing fully equipped.
5 Mounting eluent aspiration tubing to the eluent bottle
￭ Insert the eluent aspiration tubing into the eluent bottle (12-10).