Metrohm 881 Compact IC pro – Anion - Manual (Page 26)

3.4 Setting up the instrument
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
16 ￭￭￭￭￭￭￭￭
881 Compact IC pro – Anion
3 PEEK pressure screws, short
(6.2744.070) 4 Detector inlet capillary
5 Detector outlet capillary 6 Coupling (6.2744.040)
7 Sample aspirating capillary
(6.1803.040) 8 Sample outlet capillary (6.1803.040)
9 Regeneration solution aspirating capil-
lary (6.1803.020) 10 Pump tubing (6.1826.320)
With orange/yellow stoppers, for the regen-
eration solution.
11 MSM regeneration solution inlet capil-
lary
Labeled with regenerant.
12 MSM regeneration solution outlet
capillary
Labeled with waste reg.
13 Rinsing solution aspirating capillary
(6.1803.020)
14 Pump tubing (6.1826.320)
With orange/yellow stoppers, for the rinsing
solution.
15 MSM rinsing solution inlet capillary
Labeled with rinsing solution.
16 MSM rinsing solution outlet capillary
Labeled with waste rins.
17 MSM eluent inlet capillary
Labeled with in.
18 MSM eluent outlet capillary
Labeled with out.
19 Tubing olive (6.2744.034)
For connecting capillaries to the aspiration
side of the peristaltic pump.
20 Pump tubing connection (6.2744.180)
With safety device and filter, for connecting
capillaries to the outlet side of the peristaltic
pump.
3.4 Setting up the instrument
3.4.1 Packaging
The instrument is supplied in highly protective special packaging together
with the separately packed accessories. Keep this packaging, as only this
ensures safe transportation of the instrument.
3.4.2 Checks
Immediately after receipt, check whether the shipment has arrived com-
plete and without damage by comparing it with the delivery note.
3.4.3 Location
The instrument has been developed for operation indoors and may not be
used in explosive environments.
Place the instrument in a location of the laboratory which is suitable for
operation, free of vibrations, protected from corrosive atmosphere, and
contamination by chemicals.