Metrohm 830 IC Interface - Manual (Page 39)

3.2 Settings in the "830 IC Interface" window
Events setup
The Events setup tab of the 830 System [#] window contains the startup
values for the seven event output lines of system 1 or system 2 of the
830 IC Interface. These startup values are sent each time the system is
connected or a determination is started.
Each event output line can be set to the following values:
0 Line off, inactive (open)
1 Line on, active (0 V)
For technical data to the event output lines see section 4.1.
830 IC Interface / 8.830.1003 Instructions for Use
33