Metrohm 830 IC Interface - Manual (Page 38)

3 Operation
Events configuration
On the Events configuration subtab user-defined event commands can
be defined, which can be inserted into a time program after being acti-
vated with .
Name (1 st column) User-definable name of the event command
(e.g. Start_766 ).
Remotebefehl (2 nd column)
Setting the event output lines 1 … 7.
Selection:
0 (line off, inactive, open)
1 (line on, active, 0 V)
p (pulse, pulse length 150 ms)
* (leave line in current status)
For entry of the first value, enter 1 , 0 , p or * . For
entry of the other values, move the cursor in
front of the value to be changed and enter 1 , 0 ,
p or * .
Add new remote command.
Delete selected remote command.
Activate the defined remote commands for in-
sertion into the time program.
830 IC Interface / 8.830.1003 Instructions for Use
32