2 rear, Rear, Figure 3 – Metrohm 896 Professional Detector – Amperometry User Manual
Page 16
2.2 Rear
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
8
￭￭￭￭￭￭￭￭
2.896.0020 896 Professional Detector – Amperometry
2.2
Rear
1
2
3
4
5
6
7
8
10
9
Figure 3
Rear
1
Stopper
Closes off unused cable feed-through.
2
Cable feed-through
Output for detector cable.
3
PC connection socket
For connecting the instrument to the com-
puter with the USB cable (6.2151.020).
4
USB connection sockets
Two USB connection sockets, labeled with
USB 1 and USB 2.
5
Extension Module connection socket
For connecting an 872 Extension Module or
an 891 Professional Analog Out. Labeled
with Extension Module.
6
Detector connection sockets
For the connection of the installed detector,
labeled with Detector 1 and Detector 2.
The detector connection sockets which are
not used must be covered with a lid.
7
Leak sensor connection socket
For connecting the
Leak sensor connector plug, labeled with
Leak Sensor.
8
Mains switch
For switching the instrument on and off.
9
Mains cable connection socket
For connecting the mains cable
(6.2122.0x0).
10 MSB connection sockets
Two MSB connection sockets for connecting
instruments with MSB connection. Labeled
with MSB 1 and MSB 2.
(MSB = Metrohm Serial Bus)