Metrohm 756 KF Coulometer - Manual (Page 79)

4.2 Remote control commands
756/831 KF Coulometer, Instructions of Use 71
&Setup
Object Description Input range Reference
& Root
:
├ Setup Settings for the operating mode
├ .Comport Output of automatic info 1,2,1&2 4.2.2.85.
├ .Keycode Send key code ON, OFF 4.2.2.86.
├ .Tree Sending format of path info
│ ├ .Short Short format of path ON, OFF 4.2.2.87.
│ ├ .ChangedOnly Paths of modified nodes only ON, OFF ditto
│
├ .Trace Message on changed values ON, OFF 4.2.2.88.
│
├ .Lock Lock key functions
│ ├ .Keyboard Lock all keyboard keys ON, OFF 4.2.2.89.
│ ├ .Config Lock key ON, OFF ditto
│ ├ .Parameter Lock key ON, OFF ditto
│ ├ .SmplData Lock key ON, OFF ditto
│ ├ .UserMeth Lock functions
│ │ ├ .Recall Lock “loading” ON, OFF ditto
│ │ ├ .Store Lock “saving” ON, OFF ditto
│ │ ├ .Delete Lock “deletion” ON, OFF ditto
│ ├ .Exchange Lock key ON, OFF ditto
│ └ .Display Lock display function ON, OFF ditto
│
├ .Mode Setting waiting intervals
│ ├ .StartWait Waiting time after start ON, OFF 4.2.2.90.
│ ├ .FinWait Waiting time after run ON, OFF ditto
│
├ .SendMeas Automatic sending of measured values
│ ├ .SendStatus Connect/disconnect sending ON, OFF 4.2.2.91.
│ ├ .Interval Time interval 0.4...4...16200, ditto
│
MPList
│ ├ .Select Selection Assembly, Titrator 4.2.2.92.
│ ├ .Assembly From assembly
│ │ ├ .CyclNo Cycle number ON, OFF 4.2.2.93.
│ │ ├ .I Total charge (mA·s) ON, OFF ditto
│ │ ├ .Meas Measured indicator voltage ON, OFF ditto
│ │ ├ .Pot Voltage at generator electrode ON, OFF ditto
│ │ ├ .IPulse I of current pulse ON, OFF ditto
│ │ ├ .Bur Connected buret
│ │ │ ├ .V Volume of dosing unit ON, OFF ditto
│ ├ .Titrator From Titrator
│ │ ├ .CyclNo Cycle number ON, OFF 4.2.2.94.
│ │ ├ .Water Mass of water ON, OFF ditto
│ │ ├ .Meas Measured indicator voltage ON, OFF ditto
│ │ ├ .dWaterdt Drift or rate ON, OFF ditto
│ │ ├ .I Total charge (mA·s) ON, OFF ditto
│ │ ├ .Pot Voltage at generator electrode ON, OFF ditto
│ │ ├ .IPulse I of current pulse ON, OFF ditto
│