Chapter 14. restoring the factory settings, Factory settings, Procedure – Boss Audio Systems SP-505 User Manual
Page 74: Factory settings procedure
74
Chapter 14. Restoring the factory settings
Use the Initialize operation when you want to restore the
system and pattern data to the factory settings. You can restore
all data to the factory settings at once, or select a specific type
of data, such as sequencer settings, to be initialized.
Factory settings
Samples
Samples are assigned to pads [1]–[16] of user bank 1.
* Once you carry out an initialization, these samples will be
erased and cannot be recovered.
Sequencer (songs/patterns)
All songs are empty.
All user patterns are empty.
System
UTILITY CONFIG
LCD Contrast:
6
Pad Protect:
(BANK 5–16), OFF
Metronome LV:
10
Foot SW Asgn:
PLAY
Chop Demo:
ON
Pitch Demo:
ON
Power Up PTN:
PRESET
Power Up BNK:
PRESET
UTILITY MIDI
Pads Ch:
1
Part 1–4 Ch:
OFF
Prog Chg SW:
ON
Sync Mode:
AUTO
Procedure
1. Press [SONG] or [PTN] to display the Play screen.
2. Press [SYSTEM] to display the System screen.
fig.10-01a
* It is not possible to display the System screen while a pattern
or song is playing.
3. Press [F1] (UTILITY).
4. Press [F3] (INIT).
The Initialize screen will appear.
fig.14-01a
5. Use the VALUE dial to select the type of setting that
you want to initialize.
Init Target: ALL, SYSTEM, SAMPLE, SEQ
ALL:
All system-related parameters will be
initialized.
All pad samples will be erased. (Except for
preset samples)
All songs and all user patterns will be
erased.
SYSTEM:
System-related parameters will be
initialized.
SAMPLE:
All pad samples will be erased. (Except for
preset samples)
SEQ:
All songs and all user patterns will be
erased.
6. To initialize the settings you selected, press [F1]
(EXECUTE).
To cancel, press [F2] (CANCEL) or [EXIT].
When you press [F1] (EXECUTE), a screen asking you to
confirm that you indeed do want to carry out an
initialization appears.
fig.14-01b
* If you attempt to initialize SAMPLE when sample memory is
protected, the display will ask “Protected! Sure?”.
7. To initialize the settings, press [F1] (YES).
To cancel, press [F2] (NO)
8. Press [PTN] or [SONG] to return to the Play screen.
Never turn off the power while the display indicates
“Keep Power On!”