Boss Audio Systems SP-505 - Manual (Page 35)

35
Chapter 2. Using the internal effects
2
4. When you have finished making settings, press [EXIT]
twice.
Selecting an effect
1. Press [FX SELECT].
A list of the effects will be displayed. The number of the
currently selected effect will be highlighted.
fig.02-05
2. Use the VALUE dial to select the desired effect.
3. Press [ENTER].
To cancel, press [EXIT].
The selected effect and the settings of its parameters will
be displayed.
fig.02-06
4. Press [EXIT], [SONG], or [PTN] to return to the Play
screen.
Using the pads to select an effect
Effect nos. 1–16 can be selected directly by pressing pads [1]–
[16].
1. Press [FX SELECT].
A list of the effects will be displayed. The currently
selected effect is highlighted.
2. Press a pad [1]–[16] to select an effect.
The effect names are printed below each pad.
* Simply selecting an effect will not actually apply that effect. To
apply the effect, press [FX ON/OFF] to make the button light
and turn the effect on, and select the pad(s) to which you want
the effect to be applied (FX Assign; p. 34).
3. Press [EXIT], [SONG], or [PTN] to return to the Play
screen.
Turning the effect on/off
The SP-505 contains 26 different effects. You can press [ON/
OFF] to select whether these effects will be applied (on) or
not (off).
[FX ON/OFF] lit: The effect will be applied.
[FX ON/OFF] dark: The effect will not be applied.
Controlling how the effect is
applied
1. Turn an EFFECTS CONTROL knob (CTRL 1–3).
The effect will change in various ways, depending on the
knob you operate.
2. To see the currently selected effect and the parameter
settings of that effect, press [FX INFO].
fig.02-07
3. Press [EXIT], [SONG], or [PTN] to return to the Play
screen.