Boss Audio Systems SP-505 - Manual (Page 23)

23
Quick Start
Quick Start
* Sampling will stop automatically if you exceed the available
sampling time.
10. Press the pad to play back the sampled sound.
When sampling ends, the BPM will be calculated
automatically from the length of the sample. You can use
the BPM Adjust function (p. 24) or BPM Sync function
(p. 25) to edit this BPM.
If the beginning or end of the sample contains unwanted
sound or silence, you can make settings so that only the
desired portion is played. For details refer to p. 46,
“Specifying the start/end points of the sound (Omitting
unwanted portions).”
If you are not satisfied with the
sampled sound
Delete the sampled sound, and try the procedure again from
step 2.
Here’s how to delete a sample.
1. Press [DEL].
2. Press the pad to which the sample you want to delete is
assigned. The pad number will be highlighted.
You may select more than one pad simultaneously.
You can cancel your selection by pressing the pad once
again.
fig.00-24
3. Press [F1] (EXECUTE).
To cancel, press [F2] (CANCEL) or [EXIT].
fig.00-25
The sample will be deleted.
Never turn off the power while the display indicates
“Keep Power On!”