Calculated Industries 44060 - Manual (Page 98)

96 — CONSTRUCTION MASTER   PRO
APPENDIX B — PREFERENCE SETTINGS
The
Construction Master Pro calculators have Preference Settings that
allow you to customize or set desired dimensional formats and calcula-
tions. The options vary per model.
ю ю
Note: * = Default Setting or the setting calculator defaults to upon
performing an All Clear [Conv] [x].
Preference Options
1) Fractional Resolution −− *1/16 (displays fractional values to the nearest 16th of
an inch)
−− 1/64 (*Default for Trig Plus III)
−− 1/32
−− 1/64
−− 1/2
−− 1/4
−− 1/8
2) Area Display Format
(n/a for Metric Mode)
−−
*
Standard (if units entered are the same—
e.g., feet x feet—the answer will remain in this format
(sq. ft), but if units entered are different —e.g., inches
x feet—area answer will be
displayed in square feet)
−− Square Feet (area answers always displayed in sq.
ft, regardless of unit entry—e.g.,
inches x inches = sq. ft)
−− Square Yards (area answers always displayed in
sq. yards—e.g., feet x feet = sq. yds)
−− Square Meters (area answers always
displayed in sq. meters—e.g.,
feet x feet = sq. meters)
(Cont’d)
ю ю
Note: To check the current Fractional Resolution, press [Rcl] [/]. Ei-
ther “Std” (standard fractional resolution) or “Cnst” (constant) will be
displayed, along with the fractional resolution).