Calculated Industries 44060 - Manual (Page 12)

10 — CONSTRUCTION MASTER   PRO
Convert [Conv] Key—Unit Conversions and Second
Functions
The
[Conv] key is to convert between measurement units or to
access second functions, listed below:
[Conv] — Convert
Used with the measurement keys to convert between units or with
other keys to access special functions.
[Conv] [ x ] — All Clear
Clears all values, including Memory. Resets all permanent settings
to defaults.
ю ю
Note: Use only when necessary, as it deletes all stored values.
[Conv] [%] — x 2
Squares the value in the display. For example, to square the value
10, enter 10 then
[Conv] [%].
[Conv] [u
u ] — Square Root Function ( √
)
Used to find the square root of a non-dimensional or area value (e.g.,
100
[Conv] [u u ] = 10).
[Conv] [ / ] — x10 x
Allows entry of an exponent. For example, 8
[Conv] [/] 14 is 8 times
10 to the 14th power.
[Conv] [ ÷ ] — 1/x
Finds the reciprocal of a number (e.g., 8
[Conv] [÷] = 0.125).
[Conv] [ – ] — Change (+ / –) Sign
Toggles the sign of the displayed value to plus or minus.
[Conv] [ + ] — Pi ( ππ)
Constant = 3.141593
[Conv] [ •• ] — Degrees: Minutes: Seconds
Converts between D:M:S and decimal degree formats.