Calculated Industries 44060 - Manual (Page 101)

User's Guide — 99
How to Set Preferences
The following sections detail Preference Setting options for the
Con-
struction Master Pro calculators.
Enter the Preference Mode by pressing
[Conv] [Stor] (Prefs). Access
each category by pressing the [Stor] key until you reach the desired
setting.
Within each category, press the [+] or [-] keys to toggle be-
tween individual selections. Press [On/C] to exit and set in your Pref-
erence.
ю ю
Note: [+] will advance, [-] will back up. Pressing the [Stor] key con-
tinuously in this mode will revolve the Preference Settings full circle.
You may change these settings at any time by repeating the above,
and setting in a new preference. Or, you may review settings by press-
ing
[Rcl] [Stor].
To clear preferences, press
[Conv] [x].
For example, if you wish to display all your dimensional area answers
in square meters, press
[Conv] [Stor] [Stor] (Area Std), then the [+]
key until “Area 0. SQ. M” is displayed. Simply exit this mode by press-
ing
[On/C] or any key, and all your future area answers will be dis-
played in square meters.
(See the following pages for Preference Settings per model)