Calculated Industries 44060 - Manual (Page 16)

14 — CONSTRUCTION MASTER   PRO
[Conv] [ 2 ] — Acres
Enters or converts (a square value) to acres.
[Conv] [ 0 ] — Board Feet
Enters or converts cubic values to board feet. One board foot is equal
to 144 cubic inches.
WEIGHT KEYS
[Conv] [ 1 ] — Kilograms
Enters or converts (a weight or volume value) to kilograms. A dimen-
sioned volume will convert using the stored weight per volume value.
[Conv] [ 3 ] — Metric Tons
Enters or converts (a weight or volume value) to Metric tons. A di-
mensioned volume will convert using the stored weight per volume
value.
[Conv] [ 4 ] — Pounds (lbs)
Enters or converts (a weight or volume value) to pounds. A dimen-
sioned volume will convert using the stored weight per volume value.
[Conv] [ 6 ] — Tons
Enters or converts (a weight or volume value) to tons. A dimensioned
volume will convert using the stored weight per volume value.
[Conv] [ 8 ] — Store Weight per Volume
Stores a new weight per volume value as tons per cubic yard
(default
= 1.5 tons per cubic yard), or other format, as listed below:
ю ю
Note: After entering a value and pressing [Conv] [8], continue press-
ing the [8] digit key until you’ve reached the desired weight per vol-
ume format. To recall your setting, press [Rcl] [8].
•
Ton Per CU YD
•
LB Per CU YD
•
LB Per CU FEET
•
Ton Per CU M
•
kG Per CU M