Examples — using the construction master pro – Calculated Industries 44060 User Manual
Page 40
38 — CONSTRUCTION MASTER
PRO
EXAMPLES — USING THE CONSTRUCTION
MASTER PRO
The
Construction Master Pro calculators have keys and functions
labeled in common building terms. Just follow the examples and adapt
the keystrokes to your specific application.
Please note that the following examples may or may not apply to your
specific calculator model (refer to the
Comparison Grid on page 8).
Also, if you are using the
Trig Plus III, some of your answers in this
User’s Guide may differ slightly, as the calculator has a default frac-
tional resolution of 1/64" (versus 1/16" in other models). A special key-
stroke,
[Conv] [1], temporarily sets the fractional setting to sixteenths
in selected problems.
You may change your
Trig Plus III’s fraction accuracy to sixteenths by
pressing
[Conv] then [Stor] to access the fractional setting. Press [+]
until "1/16" shows in the display and press
[On/C] to set and exit the
fractional setting mode.