Finding sheathing cut – Calculated Industries 44060 User Manual
Page 71
User's Guide — 69
Finding Sheathing Cut
You have framed an equal pitch roof and need to apply the roof sheath-
ing. Find the distance from the corner of the sheathing so that you can
finish the run at the Hip rafter and cut the material. The pitch is 6
inches and you are using 4-foot by 8-foot plywood, with the
8-foot side along the plate.
Keystroke
Display
1. Enter pitch:
[On/C] [On/C]
0.
6 [Inch] [Pitch]
PTCH 6 INCH
2. Enter width of plywood:
4 [Feet] [Diag]
DIAG 4 FEET 0 INCH
3. Find length of sheathing:
[Run]
RUN 3 FEET 6-15/16 INCH