Bendix Commercial Vehicle Systems EB/ES BRAKES SERVICE MANUAL - Manual (Page 54)

53
Fastener Torque Specifi cations
All EB/ES 165, 150-4D, 150-8D, F & 6D
Fastener Torque
lbs./ft. – lbs./in. N.m
Dustshield Retaining Clip Screws 48-60 lbs./in. 5-7 N.m
Dustshield to Spider Screws 150-180 lbs./in. 16.9-20.3 N.m
Air Chamber Bracket to Steel Stamped Spider Nuts 65-85 lbs.-ft. 88-115 N.m
Air Chamber Bracket to Cast Spider Bolts 65-85 lbs.-ft. 88-115 N.m
Air Chamber Mounting Nuts (7/16"-20 Nuts) 35-40 lbs.-ft. 48-54 N.m
Air Chamber Mounting Nuts (5/8"-18 Nuts) 110-115 lbs.-ft. 149-156 N.m
Lining Bolts/Nuts For torque specs., refer to Installation Note in Lining Kit
Anchor Pin Cap Screw (ES-165-7H, 7M) 120-150 lbs./in. 13.6-16.9 N.m
EB/ES-150-4L
Fastener Torque
lbs./ft. – lbs./in. N.m
Dustshield Attaching Screws 11-16 lbs./ft. 15-22 N.m
Air Chamber Bracket Nuts 55-65 lbs./ft. 75-88 N.m
Stabilizing Screw Nut 23-27 lbs./ft. 31-37 N.m
Anchor Pin Reinforcement Nuts 35-40 lbs./ft. 47-54 N.m
Anchor Pin Retaining Nut 475-525 lbs./ft. 644-712 N.m
Shoe Hold-Down Spring Screws 6-9 lbs./ft. 8-12 N.m
Key Dimensional Specifi cations
Minimum Lining Thickness (see Shoe and Lining Inspection)
EB/ES-150-4L
3/16" (4.76mm) or 1/16" (1.59 mm) from rivet heads
EB/ES-165 1/4" (6.4 mm) or 1/16" (4.76 mm) from rivet heads
Camshaft End Play (Axial) .005" - .025" (.13 - .65 mm)
Camshaft Radial Play .035" (.91 mm) maximum
Air Chamber Face to Clevis Pin Centerline (Trailer Axle Brakes) 6-1/2" + ¦
–
1/8" (165.10 + ¦
–
3.175 mm)
Air Chamber Face to Clevis Pin Centerline (Drive Axle Brakes) 2-5/8" + ¦
–
1/16" (66.7 + ¦
–
1.59 mm)
Wheel Bearing End Play .001" - .005" (.025-.125 mm)
Air Chamber/Applied & Free Stroke
Maximum
Maximum Desired
Air Chamber Size Applied Stroke Free Stroke
30" (762.0 mm) 2" (50.8 mm) 3/8" to 5/8"
30" (762.0 mm) Long Stroke 2.5" (63.5 mm)
Specifi cation Chart
Specifi cations
Wheel Bearing
Adjustment/Lubrication