Bendix Commercial Vehicle Systems EB/ES BRAKES SERVICE MANUAL - Manual (Page 45)

44
Shoe and Lining Installation
Table 8. Shoe Installation Procedure Index
Installation / Assembly
11. Verify that air chamber face-to-clevis centerline dimension is
correct, see Inspection - Air Chamber Inspection. Ensure that clevis
lock nut is securely tightened.
12. While depressing locking sleeve, rotate adjusting nut as required
until appropriate hole in brake adjuster is aligned with hole in air.
Refer to Figure 56.
13. Install clevis pin and cotter pin.
Brake Model Page Number
EB-150-4L 44
EB-165-5D 46
EB-165-5L 46
EB-165-6D 46
EB-165-6L 46
EB-165-7D 46
EB-165-7L 46
EB-165-7F 46
EB-165-8D 46
EB-165-8F 46
EB-165-8L 46
EB-180-7R 46
ES-150-4L 44
ES-150-6D 45
ES-150-8D 45
ES-150-8F 45
ES-165-5D 46
ES-165-5L 46
ES-165-6D 46
ES-165-6L 46
ES-165-7D 46
ES-165-7F 46
ES-165-7H 50
ES-165-7L 46
ES-165-7M 48