Bendix Commercial Vehicle Systems EB/ES BRAKES SERVICE MANUAL - Manual (Page 30)

29
Figure 32. Spider Mounting Hardware Removal Figure 33. Dustshield Mounting Hardware Removal
For All 165-5,6,7,8L Models
Dustshield Removal
NOTE: On ES-165-7H, M Brakes, the dustshield is removed before
shoes and anchor pins are removed.
1. If applicable, remove screws and retaining clip. Remove all
screws attaching dustshield to spider (4-6 screws depending on
model). Refer to Figure 33.
2. Remove dustshield.
T
Removal / Disassembly
Shoe/Brake Adjuster/
Camshaft/Bracket Removal
Spider Removal
1. Perform all steps for drum and shoe removal as outlined in
Removal / Disassembly section.
2. Remove spider-to-axle attachment nuts and bolts. Refer to
Figure 32.
3. Remove spider.