Specifications, Specifications 24 – Rockwell Automation MPL-xxxx Servo Motor User Manual
Page 24
24 MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size
Rockwell Automation Publication MP-IN001H-EN-P - January 2014
Specifications
Motor feedback, auxiliary feedback, and I/O connector kits are not provided. Refer to the
Kinetix Motion Accessories Specifications Technical Data, publication
r
connector kit catalog numbers.
Attribute Value
Temperature, operating
0…40 °C (32…104 °F)
(4)
(4)
To obtain the specified motor thermal rating, mount the motor on a surface with heat dissipation equivalent to a 304.8 x 304.8 x 12.7 mm
(12 x 12 x 0.5 in) aluminum heatsink.
Temperature, storage
-30…70 °C (-22…158 °F)
Relative humidity, storage
5…95% noncondensing
Atmosphere, storage
Noncorrosive
IP Rating
(1)
of motor with optional shaft seal
(2)
installed
(1)
International protection code (IP 66) is roughly equivalent to a NEMA 35 (dust tight, drip tight).
(2)
An optional shaft seal kit is required to provide the IP66 rating (excludes lower rating for cable connectors).
See
Additional Resources on page 25
for shaft seal installation instructions.
IP 66 (dust tight, heavy jet spray)
Motor without a shaft seal, and mounted in this direction:
Shaft down
Shaft horizontal
Shaft up
IP53
IP51
IP50
ATEX rating
(3)
(3)
Operational environment according to ATEX directive 94/9/EC. See motor label for specific level of protection markings.
Group II, Zone 2
(non-mining, normal operating conditions)