Rockwell Automation FactoryTalk Historian SE 3.0 H2H Interface Installation and Configuration Guide - Manual (Page 9)

Rockwell Automation Publication H2H-IN001A-EN-E–July 2012 9
Chapter 2
Licensing
To use the FactoryTalk Historian To Historian Interface, you need
to purchase an H2H license activation file, activate the interface
using FactoryTalk Activation Manager, and assign the license
activation to the Target Server using the FactoryTalk
Administration Console.
NOTES
For more information on activating the interface, refer to the
Activate Rockwell Software Products leaflet, available with your
FactoryTalk Historian installation package.
For more information on licensing for FactoryTalk Historian
products, refer to the FactoryTalk Historian SE Installation and
Configuration Guide, section "Managing Licenses".
To assign the license activations to the target server:
1. Go to Start > All Programs > Rockwell Software > FactoryTalk
Administration Console.
2. In the Select FactoryTalk Directory dialog box, select
Network and click OK.
3. In the Explorer tree, expand System > Connections >
Historical Data.
4. Right-click the name of the server to which you want to assign
the license activations, and click Properties.
5. In the Historian Server Connection Properties dialog box,
click the Licensing tab. The table in the tab lists the types and
number of activations available for the selected server.
6. To assign a license activation to the server, type a number in
the Assigned column for the selected license activation. The
Assign the Licenses to the
Target Server